Scanning on the Konica Minolta MFPs
This post is over 5 years old, it may be out of date.
Update: as of February 27, the settings of all Konica Minolta MFP network switch ports have been changed. Please report remaining problems to C&CZ.
Scanning to e-mail sometimes doesn’t (didn’t?) work on the KM MFPs. It
can temporarily be resolved by switching the machine off and on again.
An alternative is scanning to a USB stick. Log in at the MFP with the
scan pin, put a document in the feeder or on the document glass, select
Scan and then plug the USB stick into the USB port on the right side
of the MFP, on the top side. After a few seconds the MFP recognizes the
USB stick and presents the choice “Save a document to external memory”.
OK and press
Start. See also the RU
manual on the
RU-page about the